FPC-5180 One Door Entry Outswinging 1200lbs Wireless Exit Button and Remote

Description

FPC-5180 ONE DOOR ACCESS CONTROL OUTSWINGING DOOR 1200LBS ELECTROMAGNETIC LOCK WITH SECO-LARM WIRELESS REMOTE AND SECO-LARM WIRELESS SD-8202GT-PEQ KIT
ATTENTION:
Before purchasing, it is recommended that the customer checks with their local fire authority to see if there is any additional product they may need in order to comply with the local fire codes. We are not responsible for the improper installation of our product(s) or any type of fees that can be incurred by not complying with your local fire authority.
(1)
VIS-ML1200LED: 1200lbs indoor Electric magnetic with LED Sensor
(1)
SK-910RBQ: 1-Channel Receiver 315mhz 11-24 VAC/DC
(2)
SK-919TD1S-UP: Fixed Code Transmitter, Pre-coded Wireless Remote
(2)
VISCP100: 12v 1000mA Power supply, UL listed
(1)
SD-8202GT-PEQ: Wireless RF Request-to Exit Plates Single-Gang, Green 2" Square Button
The 5180 kit is a one door 1200lbs Maglock Buzz-in kit for doors that opens out with a wireless exit button. It is mainly used for customers that do not want to physically get up and open the door. With this system, you will be able to let people in by clicking on the wireless RF remote. The remote communicates with the wireless receiver, which can program up to 50 remotes, and it has a range of 300 feet. There are two main features on the receiver that will allow you to program the wireless receiver in two different ways. The default function of the receiver is that when the power is on, the mag lock of your kit is locked and when you press the remote the maglock will unlock temporarily to open the door.
The other function that the receiver has is the ON/Off feature. This feature is very similar to a light switch; when you program this option you would press the remote once and the door will unlock and remain unlocked until you press the button again. When you press the remote again, the door will then lock. Now here is one of the advantages of the exit button in the kit, no wires!
The wireless exit button is programmed the same way as the wireless remote. The added benefit is that you can mount this exit button anywhere you want.
This kit has a 3 year warranty with full access to tech support in the USA!
Model No. VIS-ML1200LED:
Voltage Input: 12 VDC / 24 VDC
Current Draw: 12V / 500mA ; 24V / 250mA (±5%)
Holding Force: Up to 1200 lbs (545 kg)
Hall Effect Contact: SPDT rated 2A at 24 VDC
Magnetic Contact Rating: 28 VDC, 0.2A, 5W
Anti-Rust Surface Treatment: Blue Zinc Plating
Operating Temperature: 0~55° C (32~131° F)
Weight (Magnet): 2.5 kg (±1%)
Dimensions:
Magnet - (L)266x(W)67x(T)39 mm
Armature - (L)185x(W)61x(T)16.5 mm
Green/Red LED Indication for EM Lock Status
Model No. SD-8202GT-PEQ:
The ENFORCER Wireless RF Request-to-Exit Switch is the ideal solution for difficult access control installations. The device was designed as a wireless wall-mounted switch to remotely open a door or gate. It is a flexible solution that offers reliable transmission to trigger a relay when used with a SECO-LARM wireless RF receiver and a door strike or gate opener. This request-to-exit plate is perfect for placement on cement walls, brick walls or any other location where it is difficult to run wires and has a rugged stainless steel construction. The package includes a button which says "Push to Exit" and also comes with a Spanish button which says "Presione para Salir"; the button is illuminated by a green LED which indicates transmission and acts as a diagnostic tool to indicate normal operation and low battery. This product is powered by a 9V alkaline battery, sold separately.
Model No. SK-910RBQ:
Compatible with all ENFORCER 315MHz transmitters.
Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
Form 'C' type; 10A@24VDC or 120VAC per channel.
Frequency 315MHz.
LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.
Mode switch for easy transmitter learning.
Learns up to 15 transmitters.
5 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Validity
Accepts ENFORCER fixed code or CODEBUMP transmitters
Model No. SK-919TD1S-UP:
1-Channel transmitters
Frequency 315MHz. (SK-939TS1S-B: Same as SK-919TT1S-BU, but 433.92MHz)
Operates up to 500ft (150m).*
Over 68 billion (6.8x1010) possible codes.
Sleek new case with flashing LED transmission indicator.
Includes 12VDC alkaline battery with handsome key chain ring.